The Levelogger 5 records highly accurate groundwater and surface water level and temperature measurements.
Levelogger 5 Features- 10-year lithium battery
- Stainless steel housing with corrosion -resistant coating baked-on
- Accuracy of 0.05% of Full Scale (FS), e.g. M5 is accuration to 5M x 0.0005 = +/- =0.0025M = +/- 0.1 inches
- Can withstand 2 times over-pressure without permanent damage
- Faraday cage design protects against power surges e.g. lighting
- Aquifer characterization: pumping tests, slug tests, etc.
- Watershed, drainage basin and recharge monitoring
- Stream gauging, lake and reservoir management
- Harbour and tidal fluctuation measurement
- Wetlands and stormwater run-off monitoring
- Water supply and tank level measurement
- Mine water and landfill leachate management
- Long-term water level monitoring in wells, surface water
- bodies and seawater environments
- Increased stability for communication: single-eye
- optical interface—easier to clean, more scratch resistant
- Increased memory: 150,000 sets of data
- Stronger, more robust design: double o-ring seals for
- increased leakage protection
- Better thermistor sensitivity: upgraded platinum RTD
- Superior protection in harsh environments: corrosion
- and abrasion resistant coating—inside and out
- Enhanced Levelogger Software: improved Diagnostic
- Utility for more proactive user “self-tests”
For important projects with a tight budget, Levelogger 5 Junior provides a cost-effective solution for continuous water level and temperature measurement.
Levelogger 5 Junior Features- Cost effective water level & temperature datalogger
- Accuracy of 0.1% FS
- Memory holds 75,000 sets of readings
- 5 year battery
- 1 year warranty
- Compatible with Levelogger Series Software, accessories and Telemetry
The Levelogger 5 LTC combines conductivity, pressure and temperature sensors in one compact device.
Levelogger 5 LTC Features- 8-year battery
- A baked-on coating using polymerization technology protects the body against corrosion
- Minimal-maintenance
- Simple to clean and calibrate, even in the field
- Accuracy 0.05% FS
- Conductivity range 0 – 100,000 µS/cm
- Increased memory: 100,000 sets of data
- More stable communication: single-eye optical,
- easy to clean, more scratch resistant
- Stronger, robust design: double o-ring seals for
- two times over pressurization rating
- Better thermistor and conductivity sensitivity:
- upgraded platinum RTD and conductivity sensor
- Superior protection in harsh conditions: baked-on
- coating using polymerization—inside and out
- Salt water intrusion and soil salination monitoring
- Plume remediation monitoring and studies
- Leachate monitoring at landfills, mine tailings,
- waste disposal storage sites, and more
- Agricultural and stormwater runoff monitoring
- Create a historical database for potable water
- supply monitoring
- Tracer tests
Accurate Barometric Compensation For Levelogger 5
Leveloggers measure absolute pressure (water pressure + atmospheric pressure) expressed in feet, meters, centimeters, psi, kPa, or bar.
The most accurate method of obtaining changes in water level is to compensate for atmospheric pressure fluctuations using a Barologger 5, avoiding time lag in the compensation. The Barologger 5 is set above high water level in one location on site. One Barologger can be used to compensate all Leveloggers in a 30 km (20 mile) radius and/or with every 300 m (1000 ft.) change in elevation.
The Levelogger Software Data Compensation Wizard automatically produces compensated data files using the synchronized data files from the Barologger and Leveloggers on site.
The Barologger 5 uses pressure algorithms based on air rather than water pressure, giving superior accuracy. The recorded barometric information can also be very useful to help determine barometric lag and/or barometric efficiency of the monitored aquifer.
- The Barologger 5 records atmospheric pressure in psi, kPa, or mbar. When compensating submerged Levelogger 5, Edge, Gold or Junior data, Levelogger Software can recognize the type of Levelogger and compensate using the same units found in the submerged data file (e.g. feet or meters). This makes the Barologger 5 backwards compatible.
The Rainlogger 5 is designed to record the tips of a standard tipping-bucket rain gauge.
Rainlogger 5 Features:- Single-eye optical for fast, reliable communication
- ABS housing provides excellent ESD protection
- Memory for up to 100,000 time stamped readings
- Low maintenance with 10 year battery
- Designed to be used with most tipping-buckets
- Compatible with Solinst Telemetry Systems
- Measuring local precipitation
- Determining peak rainfall events
- Stormwater management
- Remote monitoring of watersheds
- Ideal for correlating precipitation events to:– Groundwater and surface water data– Watershed and drainage basin studies– Agricultural and forestry studies
New Solinst Field Tables
Well Mounted Table
800 Stand Alone Table
Levelogger 5 Adaptors
Levelogger 5 measures water level and temperature, it should be purchased with a barologger 5 to correct the water levels for effects of barometric pressure. A communication cable is required to setup the levelogger and download the data. Software can be downloaded for free.
"