"
- PVC naturally sinks in water, due to its specific gravity, relative to water.
- No weights to restrict flow of sample entering and exiting bailer.
- PVC is rigid, stays straight, never bending or distorting under normal care. (This is very important for the smaller diameter .45 inch and .70 inch bailers, which are carefully extruded for straightness).
- Bailer material is clear, to assist in field sampling, which may require visual inspection of the sample taken. (Actually see the product sampled from ground water remediation wells and fuel tanks, for example).
- Bailers are tested and approved, by an established legal environmental testing firm, for leaching, absorption and over all performance. Bailer test results yielded A+ ratings for areas tested. Tested under Methods 8260 & 8260B.
Bailer Tubing:
- Virgin medical grade Poly Vinyl Chloride. (Same medical grade PVC resin used in the manufacturing of catheters, for treatment of medical patents.)
Bailer Tops and Bottoms:
- ABS
Ball:
- High grade PVC material
- Allow samples to be poured accurately, with little or no splashing.
- Include strong, rigid tethering attachment for secure fastening of bailer rope.
- Each part press fitted and double welded, to assist in the bonding of tube to top device.
- Redesigned ball seat helps to deter sticking of ball, without sample loss, between ball and device.
- Large .65 inch opening allowing for large volumes of product to rapidly fill the bailer with minimal disturbance to the sample. Also speeds up sampling and or purge time, thus saving money.
- Each bailer part is press fitted and welded, for little or no leaking between tube and bottom device.